250 Ton Class Torpedo Boat (1913)

From The Dreadnought Project
Jump to navigationJump to search

The twenty-seven torpedoboats of the 250 Ton Class were completed between 1914 and 1916.

Armament

Guns

Two 6.6 cm L/30

Torpedoes

Four 45 cm torpedo tubes mounted in pairs on two swivel mounts; one on the forecastle, one towards the stern.

Mines

10-12

Machinery

Boilers

Two Yarrow & Company boilers, one coal burning and one oil burning

Turbines

The ships built by STT had 2-shaft Parsons turbines rated at 5000 SHP with a maximum of 6000 SHP. They had a top speed of 28 kts. At 16 kts, the STT torpedo boats had a range of 980 nm.

The Ganz-Danubius & Company ships were equipped with two sets of AEG turbines with the same power and speed ratings as above. 93F produced 6450 SHP and 29.7 kts on trials. The AEG turbines were slightly more efficient, allowing a range of 1200 nm at 16 kts.

The three CNT had 2-shaft Melms Pfenninger turbines with the same power ratings as above. The torpedo boats had top speeds of 28.5 kts. At 16 kts, the three had a 1200 nm endurance.

Compliment

The STT torpedo boats had a compliment of 39 officers and men with 38 for the rest.

See Also

Footnotes

Bibliography


250 Ton Class First-class Torpedo Boat
STT Built
  74T 75T 76T 77T  
  78T 79T 80T 81T  
Danubius Built
82F 83F 84F 85F 86F
87F 88F 89F 90F 91F
  92F 93F 94F  
  95F 96F 97F  
STT Built
  98M 99M 100M  
<– 110 Ton Class Torpedo Boats (AH)  
  First-class Torpedo Boats (AH)