Henderson Firing Gear

From The Dreadnought Project
Revision as of 22:17, 18 September 2012 by FredBot (talk | contribs) (use templates for ARTS references)
Jump to navigationJump to search
Henderson Gear[1]
Wiring as in the Queen Elizabeth and Revenge classes.

Henderson Firing Gear, often referred to by different variations, was a gyroscopic mechanism attached to a British gun director which stabilised the director layer's telescope and was wired in series with the firing circuit to convert his firing pistol from a direct firing pistol to a permissive firing key that would discharge the broadside when the ship next rolled through a reference plane. In effect, it made firing on the roll an automatic affair.

Impetus and Design

Adoption

By at least mid 1917, the equipment was being fitted to director installations for main armaments in all ships fitted or being fitted with directors. A COS was fitted in case the device should require a duplicate alternator supply and in the G.D.T., a special switch allowed main and auxiliary firing circuits to function with or without the Henderson equipment.

Service Life

See Also

Footnotes

  1. Annual Report of the Torpedo School, 1916. Plate 87.

Bibliography