Vickers Dial Fire Control Instruments: Difference between revisions
mNo edit summary |
No edit summary |
||
Line 41: | Line 41: | ||
==Bibliography== | ==Bibliography== | ||
{{refbegin}} | {{refbegin}} | ||
*{{ | *{{ARTS1903}} | ||
*{{ | *{{ARTS1904}} | ||
*{{ | *{{ARTS1906}} | ||
*{{ | *{{TorpDB1905}} | ||
*{{ | *{{TorpDB1908}} | ||
*{{ | *{{TorpDB1912}} | ||
*{{ | *{{TorpDB1914}} | ||
*{{ | *{{HFCI1909}} | ||
*{{ | *{{HFCI1914}} | ||
{{refend}} | {{refend}} | ||
[[Category:Fire Control]] | [[Category:Fire Control]] | ||
[[Category:Shipboard Equipment]] | [[Category:Shipboard Equipment]] |
Revision as of 17:01, 24 July 2012
Although Vickers made its greatest impact on history with its later F.T.P. instruments, its first offerings were a precursor that was widely deployed through 1906.
Vickers "dial instruments" were step-by-step devices more accurately referred to as "cyclometric instruments", like those of Barr and Stroud. That is, they did not indicate on a clockface, but digitally, as an old-time speedometer.[1]
Allocation and Use
In competitive testing in 1906, it was determined that Barr and Stroud's range and deflection instruments Mark II were the best available, and so a considerable spree of adoption of Vickers dial instruments came to an abrupt end after their use in Dreadnought.
By 1914, these were still listed as being used in thirty-seven ships, battleships up to Dreadnought, as well as in an assortment of armoured cruisers. The King Edward VII class is evenly split between these instruments and Barr and Stroud Mark II Fire Control Instruments which are also used by later vessels, it seems fair to judge that the Barr and Stroud family had replaced Vickers for the time being, though the 1908-1909 advent of her F.T.P. instruments used in Boadicea was to return her to the top.
Range and Deflection Transmitters
The separate range and deflection transmitters had tell-tale receivers built into them to indicate the value, and a single handle by which to drive the value through its range. They were identical except for the drums of the integral tell-tale.
Early patterns (Pattern 319 for range and 318 for deflection) had 1/4 inch figures and were geared such that a single revolution of the range handle would alter range by 100 yards (or 4 knots?), but this was changed in the later Pattern 103 and Pattern 102 to have larger 1/2 inch figures one revolution equal 25 yards or one knot of deflection.
Combined Range and Deflection Receiver
The range and deflection receiver armatures differed only in the markings and the contact surfaces of their display drums. The range receiver could indicate up to 19,975 yards on four drums, the rightmost of which had 00, 25, 50 and 75 markings only. The deflection receiver had two independent pairs of drums to indicate right and left deflections, each capable of going to 50 knots. A pair of shutters were arranged such that only the deflection drum set that was reading above zero would be visible. A set of stops prevented the drums fro reading past their last indication, and served as the means to synchronise transmitter and receiver.
A lower, single shutter displayed simple order information being transmitted by the "Check Fire Switch". It showed a white disc to indicate "control fire" and a red disc for "check fire".
A single 8-core cable was required (2 for the motor fields, 2 to power each armature, and two common returns, one for each armature.
A threaded plug with a butterfly head could be removed so that a mechanical key could be used to quickly reset the drums should a speedy synchronisation be required without having to drive the transmitter through the entire range of indictions. Curiously, these appear absent on the transmitter diagram.
The original Pattern 99 combined receiver (with 1/4 inch figures?) was later replaced with a Pattern 320, which had larger, 1/2> inch figures.
Single Deflection Receiver
There was a single deflection receiver, Pattern 317.
Check Fire Switch
There were no separate order instruments, but each set of instruments featured a 3 position "check fire switch" (Pattern 101) near the transmitters that could be set to "Control Fire" or "Check Fire" to cause the receivers to expose a white or a red disc, respectively. The intermediate position of this switch was labelled "Off" and removed power from the attached instruments entirely.
Footnotes
Bibliography
- H.M.S. Vernon. Annual Report of the Torpedo School, 1903, with Appendix (Wireless Telegraphy). Copy 478 at The National Archives. ADM 189/23.
- H.M.S. Vernon. Annual Report of the Torpedo School, 1904, with Appendix (Wireless Telegraphy). Copy 237 at The National Archives. ADM 189/24.
- H.M.S. Vernon. Annual Report of the Torpedo School, 1906, with Appendix (Wireless Telegraphy). Copy 46 at The National Archives. ADM 189/26.
- H.M.S.O., London Torpedo Drill Book, 1905 (Corrected to December, 1904). Copy in Tony Lovell's library.
- H.M.S.O., London Torpedo Drill Book, 1908 (Corrected to December, 1907). Copy in Tony Lovell's library.
- H.M.S.O., London Torpedo Drill Book, 1912 (Corrected to April, 1912). Copy in Tony Lovell's library.
- H.M.S.O., London (1914). Torpedo Drill Book, 1914 (Corrected to May 15) Copy in Tony Lovell's library.
- Admiralty, Gunnery Branch (1910). Handbook for Fire Control Instruments, 1909. Copy No. 173 is Ja 345a at Admiralty Library, Portsmouth, United Kingdom.
- Admiralty, Gunnery Branch (1914). Handbook for Fire Control Instruments, 1914. G. 01627/14. C.B. 1030. Copy 1235 at The National Archives. ADM 186/191.