Torpedo Director: Difference between revisions

From The Dreadnought Project
Jump to navigationJump to search
No edit summary
(Redirected page to Category:Torpedo Director)
 
(30 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[File:UnknownRNTorpedoDirector.jpg|thumb|480px| An unidentified British torpedo director. This is the only photograph the editor has ever seen of such a device.<ref>Originally copyright International News Service with the caption "C 8776  TRYING TO TORPEDO A GERMAN BOAT.  A torpedo leaving its tube on the deck of a British Destroyer."</ref>]]
#REDIRECT [[Category:Torpedo Director]]
 
A '''Torpedo Director''', in British service, is a calculating sight for firing torpedoes, more similar to a [[Sightsetting Equipment|settable gunsight]] than to a [[Gunnery Director|gunnery director]]. 
 
As the war began, the British were becoming increasingly dissatisfied with their directors and were exploring, for the first time, larger questions of torpedo warfare in fleet actions.  One aspect of this reconsideration was that the series of torpedo directors they had relied on were to be refashioned to embody the deflection triangle rather than the director triangle and to thereafter be superceded by a sturdier sight designed for that geometric model &mdash; the [[Torpedo Deflection Sight]].
 
==Nature and Function==
 
The ''Director Angle'' is the proper angle between the line of sight to the target and the path of the torpedo.  Helping the torpedo officer judge and discern this angle from data available to him by direct observation or external sources is the fundamental purpose of any torpedo director.  Additionally, a good torpedo director design should offer its user a quick means of judging whether the target is near enough that the torpedo will be able to reach it.
 
It should be noted that the proper director angle is dependent upon a proper estimation of enemy heading and speed (expressed in one of several ways), and upon the assumption that his motion while the torpedo is underway will, on average, continue about this mean heading.  It is easy to see aiming a torpedo which generally takes longer to reach its target than does a shell requires more cooperation on the part of the target!
 
The Royal Navy began the 20th century using torpedo directors that modeled the torpedo firing problem according to the '''Director Triangle''' &mdash that formed by
# the path of the torpedo
# the line of sight to the target at the moment of firing
# the path of the target between firing and impact.<ref>''Handbook of Torpedo Control, 1916'', pp. 4-5.</ref> 
 
As the war approached, the Royal Navy refined their hardware along lines they felt were important, issuing improved Marks or adding parts to existing directors.
 
As an example, parts such as the [[Tangent Bar]] were conceived to allow the small lateral errors created when the sight was not located directly at the torpedo tube to be painstakingly factored out.  These were later found to compromise an already loose framework while ignoring the fact that these errors were apt to be tiny in comparison with those caused by the enemy maneuvring after the torpedo was fired or a failure to accurately judge his speed and heading in the first place.<ref>''Handbook of Torpedo Control, 1916'', p. 12. A better source can be found!</ref>
 
Combining their view that the directors were flimsy, mechanically loose, and not very easy or quick to set.<ref>''Handbook of Torpedo Control, 1916'', p. 12.</ref>. 
 
More fundamentally, however, by 1915 the British were convinced that the director triangle was not the best means of establishing the proper director angle for firing and started to migrate toward a different geometric model called the '''Deflection Triangle''' &mdash; that formed by
# the path of the torpedo
# the line of sight
# a line perpendicular to the line of sight that passed through the point of impact
 
This last line was equivalent to the target's [[Speed-Across|speed-across]] if own ship were at rest.<ref>''Handbook of Torpedo Control, 1916'', pp. 4-5.</ref><ref>''Handbook of Torpedo Control, 1916'', Plate I.</ref>
 
The first step taken was to adapt the existing directors to a deflection aiming.<ref>''Handbook of Torpedo Control, 1916'', pp. 25-26.</ref>  The longer term step was to built [[Torpedo Deflection Sight]]s optimised to the geometry.  These would become the late-war successors to the torpedo directors described here.
 
==Small Innovations==
The directors started out pretty basic.  Clever torpedomen soon thought of small changes that would make them better, and these were often viewed at the Torpedo School and the best ones standardised for proper fitting and allocation.
 
* A '''Radiomir Fore Sight''' is one with a small glass tube containing radium for use in night work. 
 
* A '''Compass Ring''' was conceived in 1911 for 2006 and 2391/2392 ... an outer ring marked in Quadrant bearings that could be attached to the base of the director and set to own ship's course.  The enemy bar would be clamped to this ring. and it was thought that this ring could be adjusted manually if own ship changed course by reference to a compass near at hand or perhaps by automatic adjustment via a gyrocompass repeater.<ref>''The Annual Report of the Torpedo School, 1911'', p. 42</ref>  It sounds like a snafu.
 
* A [[Longmore Disc]] was a disc that showed the inclination of the enemy to the torpedo bar (rather than the sight bar).  It was used on the 2380, but in 1915 or thereafter, it was to be replaced by a Robinson Disc.
 
* A '''Inclination Disc''' (or [[Robinson Disc]]<ref>''The Annual Report of the Torpedo School, 1915'', p. 59</ref> ) is a disc that rides the sighting arm and is marked 0 to 180 degrees left and right so that target [[Inclination]] is directly readable.<ref>''Handbook of Torpedo Control, 1916'', p. 17.</ref> 
 
* A '''Gyro Angle Base''' or "angled stand" was proposed for some directors in 1911<ref>''The Annual Report of the Torpedo School, 1911'', p. 42-43. (C of N 26/9/11.  N.S.G. 15583/14369)</ref> to support the proposed general introduction of torpedoes with angled gyros.  It consisted of a pair of discs that could rotate up to 40 degrees either side of zero against each other and lock every 10 degrees (initially) or 5 degrees (from 1916 or so) by use of a conical spring permitted them to be clicked to the same heading a torpedo set to the same [[Torpedo Gyro Angle|gyro angle]] would take upon being fired.<ref>''Handbook of Torpedo Control, 1916'', p. 18.</ref>
 
* A [[Tangent Bar]] was a small armature which could be added to a torpedo director to offset its rear sight a short distance to make its sighting angle converge with the track of the torpedo when the director could not be located on or near the firing tube.  The idea was an example of the Royal Navy over-thinking the problem, and the service soon great disenchanted with the fragility and complexity they bestowed upon the directors.  Some time during the production of directors Pattern 2391a and 2392a, some were being sent out without tangent bars and directors of Pattern 2006 and later that were brought in for repair were sent back without their tangent bars.<ref>''Handbook of Torpedo Control, 1916'', p. 18.</ref>  The conclusion finally reached was that the lateral errors that would remain untreated without the tangent bars were apt to be vastly smaller than the other sources of error inherent in accurate torpedo fire except in very short range attacks.  These scenarios were to be treated by choosing a suitably offset aim point on the target.<ref>''Handbook of Torpedo Control, 1916'', pp. 77-78.</ref>
 
* A '''Central Bearing Disc''' "similar to those fitted in Patts. 2391-2" was considered in 1911 for the 2006 directors.<ref>''The Annual Report of the Torpedo School, 1911'', p. 42</ref>
 
 
==Royal Navy Torpedo Directors==
 
===Pattern 1192/1192a===
<small>([[Torpedo Director Pattern 1192|main article]])</small>
 
These were large, semicircular directors intended for use directing broadside fire.  They received some enhancements and alterations, but were considered obsolete by 1912.
 
===Pattern 1193/1193a===
<small>([[Torpedo Director Pattern 1193|main article]])</small>
 
An early director with a 60 degree arc, intended for firing ahead from torpedo craft.
 
===Pattern 1895/1895a===
<small>([[Torpedo Director Pattern 1895|main article]])</small>
 
Very similar to the 1193, with a 60 degree arc for use in early torpedo craft.
 
===Pattern 2006/2006a===
<small>([[Torpedo Director Pattern 2006|main article]])</small>
 
These compact, circular directors first appeared for use in armoured control towers in 1904-1905, and saw service into the great war.
 
===Pattern 2390/2390a===
<small>([[Torpedo Director Pattern 2390|main article]])</small>
 
A 60 degree director similar to Pattern 1985, available by 1912 at least, supplied to torpedo craft with heater torpedoes.
 
===Pattern 2389/2389a===
<small>([[Torpedo Director Pattern 2389|main article]])</small>
 
Available by 1910 at least, it was similar to the Pattern 2390, but fitted for use from the bridge.
 
===Pattern 2380/2380a===
<small>([[Torpedo Director Pattern 2380|main article]])</small>
 
New in 1914 and similar to the Pattern 2390a, but larger and of improved construction.<ref>''Torpedo Drill Book, 1914'', p. 564.</ref>
 
===Pattern 2387===
<!-- <small>([[Torpedo Director Pattern 2387|main article]])</small> -->
 
Available from 1910 at least.<ref>''The Annual Report of the Torpedo School, 1910'', p. 32.</ref> Same as Pattern 1192, but fitted for use from the bridge by addition of a [[Tangent Bar|tangent bar]].<ref>''Torpedo Drill Book, 1914'', p. 564.</ref>
 
===Pattern 2388/2388a===
<!-- <small>([[Torpedo Director Pattern 2388|main article]])</small> -->
 
Available by 1910 at least.<ref>''The Annual Report of the Torpedo School, 1910'', p. 32.</ref>  Same as Pattern 1193, but fitted for use from the bridge by addition of a tangent bar.<ref>''Torpedo Drill Book, 1914'', p. 564.</ref>  By 1916, they were considered obsolete.<ref>''Handbook of Torpedo Control, 1916'', p. 16.</ref>  Like the 1193, they were likely 60 degree arcs.{{INF}}
 
===Pattern 2391/2391a/2392/2392a===
<small>([[Torpedo Director Pattern 2391|main article]])</small>
 
A family of circular directors improving upon the Pattern 2006 introduced from 1909 by adding a sighting telescope and a possible shot scale.  In 1912 or so, the -a models appeared which added support for gyro angling.
 
===Pattern 2236===
<small>([[Torpedo Director Pattern 2236|main article]])</small>
 
Entering service in 1915 or 1916, and reflecting the disfavour accorded tangent bars, the 2236 was a modification of the 2391a with the tangent bar and the association telescopic member to offset the sighting telescope removed.  It had an inclination disc, a Radiomir fore sight and a deflection bar.<ref>''Handbook of Torpedo Control, 1916'', p. 18.</ref>
 
===Line of Sight Director===
<small>([[Line of Sight Director|main article]])</small>
This was a circular director similar to the Pattern 2006 intended for use on the fore bridge of a light cruiser or smaller vessel.  It sat on fixed circular base marked in relative bearings 0 to 180 degrees and the torpedo arm could pivot to match any torpedo training being used aft.{{CN}}
 
By mid 1917, they were being adapted to the deflection model.<ref>''Handbook of Torpedo Control, 1916'', p. 25, Plate 12.</ref>
 
==Royal Navy Submarine Torpedo Directors==
<small>([[Torpedo Director Pattern 3340|main article]])</small>
Handbook of Torpedo Control
plate V, VI:  Pattern 3340
 
==See Also==
*[[Torpedo Deflection Sight]]
 
==Footnotes==
{{reflist}}
 
==Bibliography==
{{refbegin}}
{{refend}}
 
[[Category:Torpedo Control]]
[[Category:Shipboard Equipment]]

Latest revision as of 16:14, 7 May 2012