Telaupad: Difference between revisions

From The Dreadnought Project
Jump to navigationJump to search
No edit summary
No edit summary
Line 4: Line 4:


==Form Factor==
==Form Factor==
[[File:ARTS_1910_TelaupadAnd520.jpg|thumb|120px|'''Suggestion for complete headset, c1910'''<br>This design was found to weigh 1.5 pounds and to work pretty well by lashing a [[Pattern 520 Navyphone|Patt. 520 transmitter]] to what might have been the current model of telaupad.<ref>''Annual Report of the Torpedo School, 1910'', p. 152, Fig. 4.</ref>  It was noted that binoculars could be freely used aloft with these headsets. ]]
[[File:ARTS1910_TelaupadAnd520.jpg|thumb|120px|'''Suggestion for complete headset, c1910'''<br>This design was found to weigh 1.5 pounds and to work pretty well by lashing a [[Pattern 520 Navyphone|Patt. 520 transmitter]] to what might have been the current model of telaupad.<ref>''Annual Report of the Torpedo School, 1910'', p. 152, Fig. 4.</ref>  It was noted that binoculars could be freely used aloft with these headsets. ]]


Telaupads where essentially large headphones, often with a good effort made at isolating the wearer from external sound.  
Telaupads where essentially large headphones, often with a good effort made at isolating the wearer from external sound.  
Line 13: Line 13:


[[Sightsetter]]s were ideal candidates for wearing telaupads, particularly in the days before [[F.T.P.]] sights came into service, or in smaller ships or ships whose secondary batteries could not receive timely outfits of specialised hardware.  It required very little engineering and fuss to wire up a ship so a telaupad could be tethered fairly near each gun.
[[Sightsetter]]s were ideal candidates for wearing telaupads, particularly in the days before [[F.T.P.]] sights came into service, or in smaller ships or ships whose secondary batteries could not receive timely outfits of specialised hardware.  It required very little engineering and fuss to wire up a ship so a telaupad could be tethered fairly near each gun.
In 1912, a new pattern of receiver (the earphone) was to be made available, the Pattern 555.  It featured naval brass for the case and a cable clamp that removed strain from the terminals.<ref>''Annual Report of the Torpedo School, 1912'', p. 79.</ref>


==See Also==
==See Also==
Line 22: Line 24:


==Bibliography==
==Bibliography==
<small>
{{refbegin}}
*{{BibUKARTS1910}}
*{{BibUKARTS1910}}
*{{BibUKARTS1912}}
*{{BibUKARTS1912}}
</small>
{{refend}}


[[Category:Communication]]
[[Category:Communication]]
[[Category:Fire Control]]
[[Category:Fire Control]]
[[Category:Shipboard Equipment]]
[[Category:Shipboard Equipment]]

Revision as of 20:55, 29 October 2009

Graham's New Pattern Telaupad and Headgear, c1912
In 1912, it was decided that these were to become the model for all future supply.[1] It was proudly noted that springs helped maintain a tight fit with rubber rings helping isolate sound.

Telaupad is the contemporary British term for headphones used in a variety of shipboard applications, often in Fire Control tasks where the operator had to keep his hands free and be attentive to a remote source of information and command.

Form Factor

File:ARTS1910 TelaupadAnd520.jpg
Suggestion for complete headset, c1910
This design was found to weigh 1.5 pounds and to work pretty well by lashing a Patt. 520 transmitter to what might have been the current model of telaupad.[2] It was noted that binoculars could be freely used aloft with these headsets.

Telaupads where essentially large headphones, often with a good effort made at isolating the wearer from external sound.

In time, some telaupad users were also given microphones so they had a complete hands-free means of communicating bidirectionally.

Application

Sightsetters were ideal candidates for wearing telaupads, particularly in the days before F.T.P. sights came into service, or in smaller ships or ships whose secondary batteries could not receive timely outfits of specialised hardware. It required very little engineering and fuss to wire up a ship so a telaupad could be tethered fairly near each gun.

In 1912, a new pattern of receiver (the earphone) was to be made available, the Pattern 555. It featured naval brass for the case and a cable clamp that removed strain from the terminals.[3]

See Also

Footnotes

  1. Annual Report of the Torpedo School, 1912, p. 78, Plates 42-3.
  2. Annual Report of the Torpedo School, 1910, p. 152, Fig. 4.
  3. Annual Report of the Torpedo School, 1912, p. 79.

Bibliography