Siemens Fire Control Instruments: Difference between revisions
No edit summary |
No edit summary |
||
| Line 8: | Line 8: | ||
==Mark I Instruments== | ==Mark I Instruments== | ||
: | {|border="2" align=right cellpadding="2" cellspacing="0" style="margin: 0 0 1em 0.5em; background: #f9f9f9; border: 1px #aaa solid; border-collapse: collapse; font-size: 95%;" width="200" | ||
|- | |||
!Siemens Mark I Instruments | |||
|- | |||
|Pattern 90 Range Transmitter | |||
|- | |||
|Pattern 86 Range Receiver | |||
|- | |||
|Pattern 88 Deflection Transmitter | |||
|- | |||
|Pattern 84 Deflection Receiver | |||
|- | |||
|Pattern 89 Order Transmitter | |||
|- | |||
|Pattern 85 Order Receiver | |||
|- | |||
|} | |||
The Siemens Mark I family of instruments were early examples of direct-working equipment. Their utility in 1914 appears limited, as the range of indications they permit (maximum range 9975 yards) was insufficient for tactical demands of the coming war. Cross-referencing with Appendix I, it appears that the only ships fitted with Siemens Mark I gear at the time this handbook was created were Albion, Goliath, Ocean, Vengeance, and Canopus. | |||
The '''Pattern No. 90 Range Transmitter''' was apparently an old system, capable of sending ranges from 0 to 9,975 yards. It had 3 handles on it, each able to indicate a figure on a quadrant underneath. Inside, drums would rotate to establish the proper connections to energize wires needed to replicate the indicated figure on the receiver. Drums A and B had 10 positions (0-9) to convey thousands and hundreds of yards, and drum C having 4 positions to convey 00, 25, 50 or 75. Consequently, the reading could not be read across, but your eye would have to see which number was being pointed at in each of the 3 positions. The levers had a small push-button on their tips which presumably had to be depressed before the lever could be moved to another position, and which locked it precisely in one of the positions when released. | |||
The corresponding '''Pattern No. 86 Range Receiver''' also had 3 drums to indicate the range, each with a star-like ring of electromagnets (10 in A and B, 4 in C). The 28 wires connecting the transmitter to the receiver would cause the 3 drums in the receiver to spin to indicate the range commanded at the transmitter, as it energized the proper electromagnet within the drum, causing it to spin to allow this particular magnet to face one on the housing. Presumably, the range was read off a line of windows permitting the labelled faces of the 3 drums to be read. I do not know if the housing was rectangular or had a rounded front face or top edge. | |||
The '''Pattern No. 88 Deflection Transmitter''' and '''Pattern No. 84 Deflection Receiver''' were minor adaptations of the range instruments. The sole difference was that the rightmost (C) drums had "Right" and "Left" written on it rather than 00, 25, 50 or 75. I do not know whether there were 2 or 4 positions for the transmitter's rightmost lever. One would imagine they'd have tweaked it to have just 2 positions. By Royal Navy practice, then, the Mark I. deflection gear could indicate 99 knots left or right deflection as a maximum, which was an ample domain. | |||
The '''Pattern No. 89 Order Transmitter''' allowed the relay of firing orders by the position of a clock-like indicating hand. There were three positions it could assume -- the one at the 12 o'clock position was labeled "CEASE", the one at 4 o'clock was "CONTROL", and at 8 o'clock "INDEPENt" with the T curiously shrunk to connote the abbreviation of "independent". | |||
The '''Pattern No. 85 Order Receiver''' had a small window through which "Control'd". "Cease" and "Independent" (from top to bottom) could be read on the swinging sector visible through it. Apparently, a loss of power at the device would cause "Cease" to be the setting indicated, as the other two positions are obtained by magnetic influence overpowering a centering spring device. The device needed 2 wires for its electromagnets (coming from its transmitter) and a single wire for its return. | |||
==Mark II Instruments== | ==Mark II Instruments== | ||
: | {|border="2" align=right cellpadding="2" cellspacing="0" style="margin: 0 0 1em 0.5em; background: #f9f9f9; border: 1px #aaa solid; border-collapse: collapse; font-size: 95%;" width="200" | ||
|- | |||
!Siemens Mark II Instruments | |||
|- | |||
|Pattern 96 Range Transmitter | |||
|- | |||
|Pattern 83 Range Receiver | |||
|- | |||
|Pattern 94 Deflection Transmitter | |||
|- | |||
|Pattern 91 Deflection Receiver | |||
|- | |||
|Pattern 95 Order Transmitter | |||
|- | |||
|Pattern 92 Order Receiver | |||
|- | |||
|Pattern ?? Rate Transmitter | |||
|- | |||
|Pattern ?? Rate Receiver | |||
|- | |||
|} | |||
The Mark II family of devices were refinements of the earlier generation. Appendix I indicates that only Glory was equipped with them. The drums in the Mark II. instruments employed 5 magnets instead of the 10 used in Mark I, and this allowed fewer wires (15 + 2 power leads of larger diameter) to be used to tie transmitter to receiver. The full range of 10 indicating positions for the drums A and B was retained by clever combinations of electromagnets being employed rather than the use of a single magnet for each position as in the Mark I devices. | |||
There was also a Siemens Mark II Rate Transmitter and Receiver pair (no Pattern Nos. assigned, apparently) which bore close resemblance to the range instruments, but with an 4th element and handle. Drums A, B and C had 10 positions and communicated values from 0 to 99.9 in tenths. The fourth handle had 3 positions: "Open", "Close" and a blank spot showing when no rate should be taken from the indicator. It required the 17 wires of the Mark II. range instruments plus an additional 2 wires for the fourth element. I have to confess I have no idea what units this dynamic range of +/- 99.9 was meant to employ. | |||
: | |||
==See Also== | ==See Also== | ||
Revision as of 21:07, 21 September 2009
Siemens manufactured a variety of Direct-Working Fire Control Instruments and bells for shipboard communication. The Royal Navy tested and deployed in 18 pre-dreadnoughts a variety of early instruments, but soon settled on the [Step-by-Step]] instruments manufactured by Barr and Stroud and Vickers for installations after around 1907.[Citation needed]
Prototype Design and Testing
In 1903, Siemens received permission to send a set of step-by-step transmitters and receivers to Vernon for testing and evaluation, claiming to have overcome difficulties then associated with such devices.[1]
In 1904, testing was done with 2 types of Siemens gear. "Siemens A" was a very reliable 4-wire step-by-step system (Vernon reported it had "never been known to miss a step") for conveying ranges or deflections. Vernon seemed well pleased with it, asking only that the range model be arranged in 25 yard step sizes rather than 100 as demonstrated, and that illumination at the receiver and a reply acknowledgement lamp back to the transmitter be stricken. "Siemens B" was a 10-order direct-working instrument pair employing a large number of wires between transmitter and receiver. That same year, this defect was offset by an innovation of Lieutenant C. R. Nicholl, who reduced the number of wires by using them to indicate in some binary fashion the position the transmitter means to send.[2]
Mark I Instruments
| Siemens Mark I Instruments |
|---|
| Pattern 90 Range Transmitter |
| Pattern 86 Range Receiver |
| Pattern 88 Deflection Transmitter |
| Pattern 84 Deflection Receiver |
| Pattern 89 Order Transmitter |
| Pattern 85 Order Receiver |
The Siemens Mark I family of instruments were early examples of direct-working equipment. Their utility in 1914 appears limited, as the range of indications they permit (maximum range 9975 yards) was insufficient for tactical demands of the coming war. Cross-referencing with Appendix I, it appears that the only ships fitted with Siemens Mark I gear at the time this handbook was created were Albion, Goliath, Ocean, Vengeance, and Canopus.
The Pattern No. 90 Range Transmitter was apparently an old system, capable of sending ranges from 0 to 9,975 yards. It had 3 handles on it, each able to indicate a figure on a quadrant underneath. Inside, drums would rotate to establish the proper connections to energize wires needed to replicate the indicated figure on the receiver. Drums A and B had 10 positions (0-9) to convey thousands and hundreds of yards, and drum C having 4 positions to convey 00, 25, 50 or 75. Consequently, the reading could not be read across, but your eye would have to see which number was being pointed at in each of the 3 positions. The levers had a small push-button on their tips which presumably had to be depressed before the lever could be moved to another position, and which locked it precisely in one of the positions when released.
The corresponding Pattern No. 86 Range Receiver also had 3 drums to indicate the range, each with a star-like ring of electromagnets (10 in A and B, 4 in C). The 28 wires connecting the transmitter to the receiver would cause the 3 drums in the receiver to spin to indicate the range commanded at the transmitter, as it energized the proper electromagnet within the drum, causing it to spin to allow this particular magnet to face one on the housing. Presumably, the range was read off a line of windows permitting the labelled faces of the 3 drums to be read. I do not know if the housing was rectangular or had a rounded front face or top edge.
The Pattern No. 88 Deflection Transmitter and Pattern No. 84 Deflection Receiver were minor adaptations of the range instruments. The sole difference was that the rightmost (C) drums had "Right" and "Left" written on it rather than 00, 25, 50 or 75. I do not know whether there were 2 or 4 positions for the transmitter's rightmost lever. One would imagine they'd have tweaked it to have just 2 positions. By Royal Navy practice, then, the Mark I. deflection gear could indicate 99 knots left or right deflection as a maximum, which was an ample domain.
The Pattern No. 89 Order Transmitter allowed the relay of firing orders by the position of a clock-like indicating hand. There were three positions it could assume -- the one at the 12 o'clock position was labeled "CEASE", the one at 4 o'clock was "CONTROL", and at 8 o'clock "INDEPENt" with the T curiously shrunk to connote the abbreviation of "independent".
The Pattern No. 85 Order Receiver had a small window through which "Control'd". "Cease" and "Independent" (from top to bottom) could be read on the swinging sector visible through it. Apparently, a loss of power at the device would cause "Cease" to be the setting indicated, as the other two positions are obtained by magnetic influence overpowering a centering spring device. The device needed 2 wires for its electromagnets (coming from its transmitter) and a single wire for its return.
Mark II Instruments
| Siemens Mark II Instruments |
|---|
| Pattern 96 Range Transmitter |
| Pattern 83 Range Receiver |
| Pattern 94 Deflection Transmitter |
| Pattern 91 Deflection Receiver |
| Pattern 95 Order Transmitter |
| Pattern 92 Order Receiver |
| Pattern ?? Rate Transmitter |
| Pattern ?? Rate Receiver |
The Mark II family of devices were refinements of the earlier generation. Appendix I indicates that only Glory was equipped with them. The drums in the Mark II. instruments employed 5 magnets instead of the 10 used in Mark I, and this allowed fewer wires (15 + 2 power leads of larger diameter) to be used to tie transmitter to receiver. The full range of 10 indicating positions for the drums A and B was retained by clever combinations of electromagnets being employed rather than the use of a single magnet for each position as in the Mark I devices.
There was also a Siemens Mark II Rate Transmitter and Receiver pair (no Pattern Nos. assigned, apparently) which bore close resemblance to the range instruments, but with an 4th element and handle. Drums A, B and C had 10 positions and communicated values from 0 to 99.9 in tenths. The fourth handle had 3 positions: "Open", "Close" and a blank spot showing when no rate should be taken from the indicator. It required the 17 wires of the Mark II. range instruments plus an additional 2 wires for the fourth element. I have to confess I have no idea what units this dynamic range of +/- 99.9 was meant to employ.
See Also
Footnotes
Bibliography
- Template:BibUKARTS1903
- Template:BibUKARTS1904
- Template:BibUKARTS1906
- Template:BibUKTorpedoDrillBook1905
- Template:BibUKTorpedoDrillBook1908
- Template:BibUKTorpedoDrillBook1912
- Template:BibUKTorpedoDrillBook1914
- Admiralty, Gunnery Branch (1910). Handbook for Fire Control Instruments, 1909. Copy No. 173 is Ja 345a at Admiralty Library, Portsmouth, United Kingdom.
- Admiralty, Gunnery Branch (1914). Handbook for Fire Control Instruments, 1914. G. 01627/14. C.B. 1030. Copy 1235 at The National Archives. ADM 186/191.
