View source for Dreyer Table Mark III*

[[File:DreyerTableMarkIIIStar_operators_1918.jpg|thumb|360px|'''Fig. 1: Mark III* Dreyer Table operators, c1918'''<br>This shows a table with a Standard Bearing Plot as depicted in the 1918 Handbook but perhaps not really adopted in service. Notice how the organization of the components has changed from that in the [[Mark III Dreyer Table|Mark III table]].]]

The '''Mark III* Dreyer Table''' was an updated version of the [[Mark III Dreyer Table|Mark III table]] that was being developed to equip light cruisers as the war ended.  As a consequence, it saw no role in combat but likely served as an affordable and proven platform whose obsolescent design mattered less in lighter ships who were uncommonly equipped to have such amenities.  By 1930, it was used in some [[Hawkins Class Cruiser (1917)|''Hawkins'' class cruisers]] in lieu of [[Dreyer Table Mark I*|Mark I* tables]] originally envisioned for them.

==Development==
The Mark III* table was slightly larger in width and depth than the Mark III table, but somehow lower in height.  A key difference in the two models is that the Mark III*'s components were rearranged, likely in an effort to make them easier to serve.  The Mark III*'s late date of development also meant that it likely was never envisioned in having early-model accoutrements (e.g.: the [[Early Dreyer Bearing Plot|early bearing plot]] or [[Brownrigg Keyboard]]).

{| border="1" cellpadding="3" cellspacing="0" align=right
|-
| bgcolor=CEDFF2 align="center" colspan="2"|'''Overall Dimensions Compared to Mark III (1918)'''<ref>Dreyer Handbook, 1918 p. 90.</ref>
|-valign="top"
| Width 
| 9 feet, 5.5 inches (4 inches wider)
|-
| Depth
| 4 feet, 3.5 inches (1.5 inches deeper)
|-
| Height of<br>Range Rate Grid
| 3 feet, 7.5 inches (2.5 inches higher)
|-
| Height of<br>top of dumaresq
| 4 feet, 2 inches (1 foot 7 inches lower)
|}

===Motive Power===
As in the Mark III table, power for drawing the paper through the plots and for the the range and bearing clocks was provided by an electric motor equipped with a speed governor.  Should power fail, an alternate hand-drive placed behind the table could be used.  The person working this handle observed a stop-watch in a box behind an etched glass cover which revolved as he worked his handle.  By keeping the etching in line with the stopwatch's hand, the correct speed to regulate the table's activity was delivered.

===Dumaresq===
[[File:DreyerTableMarkIIIStar_diagram_1918.jpg|thumb|400px|'''Fig. 2: Schematic of Mark III* Dreyer Table w/ Standard Bearing Plot, c1918'''<br>An illustration of how the table would work with the automatic deflection corrector gear. ]]
The adapted [[Mark VI* Dumaresq]] in these tables had a free dial plate rather than the fixed dial plate found on the dumaresq in the Mark III table; flexible shafting permitted the indicator along the line of bearing to show the range rate set on the clock in the lower housing.  A gyro-compass linkage maintained own heading as before.<ref>''Handbook of Captain F.C. Dreyer's Fire Control Tables, 1918''.  p. 19.</ref>

===Range Clock===
The range clock was underneath the dumaresq and the handle for setting its [[Range Rate|range rate]] also moved an indicator in a slot along the line of bearing in the dumaresq's dial plate.

The range clock's output shaft fed a tuning differential which drove the carrier for the red [[Clock Range|clock range]] pencil across the range plot and permitted a [[Tuning Handle|''tuning handle'']] to quickly position the pencil to the desired range.  The tuning gearbox included a resettable count-up dial, and a hand-worked [[Pedalling Clutch|pedalling clutch]] allowed the tuner to select whether his tuning should be negatively fed into the [[Spotting Corrector]] to keep the [[Gun Range|gun range]] unchanged by the tuning.

===Bearing Clock===
[[File:DreyerTableMarkIIIStarGDT_diagram_1918.jpg|thumb|400px|'''Fig. 3: Schematic of Mark III* Dreyer Table w/ G.D.T. Gear, c1918'''<br>Even though this is schematic, it helps indicate how much more compact the plotting paper on the G.D.T. was than on the Standard Bearing Plot. ]]

As first designed for the standard bearing plot, no bearing clock was incorporated.<ref>''Handbook of Captain F.C. Dreyer's Fire Control Tables, 1918''.  Plate 7.</ref><ref>Brooks.  ''Dreadnought Gunnery'', p. 177.</ref>  When the fitting of [[G.D.T.]] gear was decided upon, a bearing clock was added (see image to right).<ref>Brooks.  ''Dreadnought Gunnery'', p. 177.</ref>

===Spotting Corrector===
The spotting corrector in the 1918 handbook featured:
* the customary handle to enter spotting corrections
* a resettable count-up dial for each incremental correction
* a pointer to indicate the total correction in place
* a pointer to indicate the current [[Straddle Correction|straddle correction]] to ease the interactions with the [[Dreyer Calculator]]

The final gun range from the spotting corrector was conveyed to:
* A worm shaft for the gun range pencil holder
* A pair of digital [[Gun Range Counter|gun range counters]]; one nearby and one convenient to the [[Wind Dumaresq]] and [[Deflection Correction Link Gear]].
* A commutator to relay gun range to control positions and conning tower
* A flexible shaft to carry gun range to the [[Range Master Transmitter]] on the bulkhead of the TS.
* A flexible shaft to carry gun range to the deflection drum (the second gun range counter was driven off this).

It seems a little disappointing to me that the gun range directly worked on the deflection drum but required 2 separate manual transfers to update the wind dumaresq and deflection correction link gear.

===Range Plot===
The Mark III*'s range plot was typical to other well-appointed models; a large surface placed on the right, with a [[Range Rate Grid|range rate grid]] positioned over it.  Unlike in the Mark III table, however, the tuning handle was placed ''behind'' the table to free up space.  The tables appeared so late in the war that their range plot fittings were probably always the most modern patterns found in the 1918 Handbook.{{INF}}

'''Rate Grid'''
Probably only the most modern pattern of [[Range Rate Grid#1918 Model|range rate grid]].

'''Plotting Range Cuts'''
Probably only the [[Range Typewriter]]s, as they had been deployed widely in 1917.<ref>Brooks.  ''Dreadnought Gunnery'', p. 173.</ref>

'''Range Pencils'''
The tables probably always had a [[Gun Range|gun range]] pencil driven by the [[Spotting Corrector]] in addition to the traditional red [[Clock Range|clock range]] pencil.

{| border="1" cellpadding="5" cellspacing="0"
|-valign="top"
| Plotting Ranges 
| 2,000 - 16,400 yards<br>(a +8,000 yard extended scale added later allowed plotting to 24,400 yards)<ref>Dreyer Handbook, 1918 p. 17.</ref>
|-
| Paper width
| 36 inches
|-
| Scale
| 400 yards/inch 
|-
| Paper speed
| 2 inches / minute
|-
|}

The extended range scales were likely fitted to tables as opportunity arose around the time (1915?) such a modification was made to ???? (Brooks){{CN}}.

===Bearing Plot===

==Deployment==
{| border="1" padding="20" cellpadding="5" cellspacing="0" 
!colspan=2|Ships slated, in 1918, to receive Mark III*
|-valign="top"
!style="color: white; height: 30px; background: crimson;"| ''Ship to be Fitted''
!style="color: white; height: 30px; background: crimson;"| ''Commissioned/Completed''
|-
|[[H.M.S. Cairo (1918)|''Cairo'']]
|September 1919
|-
|[[H.M.S. Calcutta (1918)|''Calcutta'']]
|August 1919
|-
|[[H.M.S. Capetown (1919)|''Capetown'']]
|February 1922
|-
|[[H.M.S. Carlisle (1918)|''Carlisle'']]
|November 1918
|-
|[[H.M.S. Colombo (1918)|''Colombo'']]
|July 1919
|-
|[[H.M.S. Delhi (1918)|''Delhi'']]
|June 1919
|-
|[[H.M.S. Dunedin (1918)|''Dunedin'']]
|October 1919
|-
|[[H.M.S. Durban (1919)|''Durban'']]
|September 1921
|}

The Dreyer Handbook of 1918 indicates a number of as-yet unfinished light cruisers were being equipped with these tables (see table to right).<ref>''Handbook of Captain F.C. Dreyer's Fire Control Tables, 1918''.  p. 3.</ref>  The odd aspect is that contemporary procurement initiatives were placing less-capable [[Turret Control Table]]s in other light cruisers and even [[Mark I* Dreyer Table]]s in modern ''heavy'' cruisers.<ref>''Handbook of Captain F.C. Dreyer's Fire Control Tables, 1918''.  p. 3.</ref>

Given their dates of completion well after the June 1918 promulgation of the document outlining the intention to outfit them with Mark III* tables, it seems reasonable to conclude that all were equipped with tables soon after their completion, possibly with GDT gear from the outset.

By 1930, the allocation was as follows.<ref>''Pamphlet on the Mark III* Dreyer Table, 1930'', p. 1.</ref>
{| border="1" padding="20" cellpadding="5" cellspacing="0" 
!colspan=2|Ships fitted with Dreyer Table Mark III*<br><small><small>* = Modified Mark III* table</small></small><br><small><small>** = Without [[G.D.T.]] Gear</small></small>
|-valign="top"
!style="color: white; height: 30px; background: crimson;"| ''Class''
!style="color: white; height: 30px; background: crimson;"| ''Ship''
|-
|rowspan=2|[[Hawkins Class Cruiser (1917)|''Hawkins'']]||[[H.M.S. Frobisher (1920)|''Frobisher'']]
|-
|[[H.M.S. Effingham (1921)|''Effingham'']]
|-
|rowspan=2|[[Emerald Class Cruiser (1920)|''Emerald'']]||[[H.M.S. Emerald (1920)|''Emerald'']]
|-
|[[H.M.S. Enterprise (1919)|''Enterprise'']]
|-
|rowspan=8|[[Danae Class Cruiser (1917)|''Danae'']]||[[H.M.S. Dauntless (1918)|''Dauntless'']]*
|-
|[[H.M.S. Danae (1918)|''Danae'']]*
|-
|[[H.M.S. Delhi (1918)|''Delhi'']]
|-
|[[H.M.S. Despatch (1919)|''Despatch'']]
|-
|[[H.M.S. Diomede (1919)|''Diomede'']]
|-
|[[H.M.S. Dragon (1917)|''Dragon'']]*
|-
|[[H.M.S. Dunedin (1918)|''Dunedin'']]
|-
|[[H.M.S. Durban (1919)|''Durban'']]
|-
|rowspan=5|''Capetown''||[[H.M.S. Cairo (1918)|''Cairo'']]
|-
|[[H.M.S. Calcutta (1918)|''Calcutta'']]
|-
|[[H.M.S. Capetown (1919)|''Capetown'']]
|-
|[[H.M.S. Colombo (1918)|''Colombo'']]
|-
|[[H.M.S. Carlisle (1918)|''Carlisle'']]
|-
|rowspan=2|Aircraft Carriers||[[H.M.S. Eagle (1918)|''Eagle'']]**
|-
|''Hermes''**
|-
|rowspan=3|Gunnery Schools||[[H.M.S. Excellent (Gunnery Training School)|''Excellent'']]
|-
|[[Chatham Gunnery School|Chatham]]
|-
|[[Devonport Gunnery School|Devonport]]
|}

==See Also==
*[[Dreyer Fire Control Table]]
*[[Dreyer Table Mark III]]
*[[Dreyer Table Mark I*]]

==Footnotes==
{{reflist}}

==Bibliography==
{{refbegin}}
*{{DreyerH}}
*{{BrooksDGBJ}}
*{{BrooksThesis}}
*{{RobertsAnatomyDreadnought}}
*{{THArgoAndDreyer}}
{{refend}}

[[Category:Dreyer Fire Control Table]]
[[Category:Fire Control]]
[[Category:Shipboard Equipment]]